Table of Contents
How to Extend the Boundary Wire for Your Robotic Lawnmower
When using a best robotic lawnmower, there may be occasions when you need to extend the boundary wire for your work area. This article will guide you through using the provided wire connector to extend the boundary wire, ensuring your wireless robotic lawnmower can cover a wider range of work areas.
Applies to: Smonet Robot Lawnmower
- Disconnect the charging station from the power outlet.
- Use a wire cutter to cut the boundary wire at the desired extension installation point.
- Add the wire at the desired extension installation point.
- Insert the wire ends into the wire connector until you can clearly see the ends of the boundary wire through the transparent area of the connector.
- Press down the blue upper cover with pliers to secure the wires in the connector.
- Connect the charging station to the power outlet.
Note: The maximum length of boundary wire can’t exceed 180m, otherwise the mower can’t work.
By extending the boundary wire, you can ensure your robotic lawnmowers covers a wider work area, making your lawn maintenance more efficient.
