Table of Contents
How to Ensuring Safety and Proper Power Connection for Your Robot Lawnmower Charging Station
When it comes to your best robot lawnmower charging station, safety and proper power connection are paramount. Here’s how to ensure both:
Applies to: Smonet Robot Lawnmower
1. Securing the Charging Station
Hammer two metal ground nails into the 2 holes located at the head of the charging station.
Note: Make sure the nails are completely hammered into the soil.
- Use the hex key to screw the plastic screws provided into the 4 holes of the charging station.
2. Power Connection
- Connect the power cord to the power adapter by aligning the pins on the power cord connector with the corresponding holes on the adaptor connector. Then, secure them by twisting the threaded locking ring.
- Plug the power adaptor into a 100-240V power outlet to provide power to the charging station.
Note: If needed, the power cable can be extended using the extension cable included in the box.
By following these steps, you can ensure the safety and proper functioning of your best robot lawnmowers charging station, providing a reliable power source for your mower.
