H1-BF Smart Deadbolt Preparation Before Installation

Table of Contents

H1-BF Smart Deadbolt Preparation Before Installation

Before installing the H1-BF Smart Fingerprint Door Lock, you will need to check the dimensions of the door to make sure it fits the lock. Below are the door size requirements.

Applies to: Smonet Smart Deadbolt Lock

1. Cross bore diameter: 54 mm (2.13 inches)

H1-BF cross bore diameter

2. Backset: 60 /70 mm (2.36/2.76 inches)

H1-BF backset

3. Door thickness: 38 to 48 mm (1.5/1.89 inches)

H1-BF door thickness

4. Edge bore diameter: 24 mm (0.94 inch)

H1-BF edge bore diameter