Table of Contents
How to Properly Lay Boundary Wire for Your Electric Battery Lawn Mower
Ensuring that the boundary wire for your small electric lawn mower is correctly laid is essential for efficient and hassle-free operation. By following the proper steps, you can create clear boundaries for your mower, allowing it to navigate your lawn effectively and avoid any obstacles.
Applies to: Smonet Electric Battery Lawn Mower
1. Press the buckles on the left and right sides, then lift up to remove the back cover of the charging station.
2. Pull the wire from the coil. Pass one end of the boundary wire through the slot in the middle of the charging station plate, and extend it all the way forward to the charging station tower.
3. Peel off the insulation layer of the wire end by 10-15 mm/0.39-0.59 inch, and insert the boundary wire into the black port. Make sure no stripped wire is visible outside the connection point.
4. Lay the boundary wire around the entire mowing area.
5. After the boundary wire laying is completed, peel off the insulation layer of the other wire end by 10-15 mm. Pass the wire through the wire slot under the charging station tower, and then insert the wire end into the red port. Make sure no stripped wire is visible outside the connection point.
6. After the wiring is completed, reinstall the black cover of the charging station to protect it from rain and water.
7. Secure the boundary wire with a peg next to the charging station plate. The peg needs to be hammered vertically into the ground with a claw hammer.
Notes：
- Secure the boundary wire with pegs every 75 cm.
- Lay at least 1.5 m straight boundary wire in the front and back the charging station without any bends.
- Comb and straighten the grass beneath the wire, ensuring the wire is close to the ground.
In conclusion, laying the boundary wire for your best electric battery lawn mower is a crucial step in ensuring its optimal performance. By carefully following the outlined steps and paying attention to detail, you can create a well-defined perimeter that allows your mower to operate seamlessly. Remember to periodically check the wire for any damage or displacement, and make adjustments as needed to maintain its effectiveness.
