Table of Contents
How To Use Pool Vacuum Cleaner
Using your best pool vacuum cleaner correctly ensures that your pool stays clean and well-maintained with minimal effort. Here’s a step-by-step guide to help you get the most out of your cordless pool vacuum cleaners.
Applies to: Smonet Pool Cleaning Robots
1. CHARGING
- Connect the machine to the power supply to start charging. The LED light will be red solid.
- The LED light will turn solid green when the device is fully charged, and will then turn off automatically after 10 minutes.
Note: Charging should be done indoors to prevent damage to the charger, the charger is not waterproof, not sunproof.
2. PLACEMENT INTO THE POOL
2.1 ALL-COVER MODE
Note: After turning on the machine, the machine will automatically clean the entire pool, including wall and floor.
- Press the button to turn it on
- Put the device into the pool, making sure that the water surface is above the top of the machine to enable proper use. The LED light will turn solid blue when it starts cleaning the pool.
3. REMOVAL FROM THE POOL
Note: Please attach the hook (included in your packaging) to a compatible pole, the pole is not included in the package.
- Hook up the machine by using a pole.
- Before cleaningthe filter, press and hold to switch off the cleaner.
4. CLEANING
Note: Clean the basket before it dries out. Make sure the machine is off.
- Unbuckle both sides of the filter basket to open the lid.
- Remove the filter basket.
- Open the cap of the basket.
- Clean the filter basket.
- Assemble the pool vacuum cleaner robot.
5. REPLACEMENT OF BATTERY
Note: To prevent any negative impacts on the performance of a new battery, please allow the machine to stand for 2 days before replacement to ensure the complete evaporation of moisture.
Follow the steps below to replace the battery, and ensure that the cordless pool vacuum cleaner achieves an optimal cleaning state.
- Remove the six screws that are used to secure equipment and remove the existing battery.
- Insert the new battery according to the corresponding contacting positions of used battery.
Note: Before installing a new battery, clean up the water droplets/sand and other foreign objects from the connection position.
- Installing, fixing and locking the screws.
Taking care of your pool cleaner with regular maintenance and proper use will extend its lifespan and keep your pool sparkling clean. Enjoy your pristine pool with minimal effort, and let your auto pool cleaner do the work for you!
